Product Detail
Product Details: Matrix Panelized Keypad Rigid-Flex PCB (0.6mm Rigid FR4 + 0.1mm PI Flexible Substrate, Black Solder Mask, ENIG)
Product Features
22-up Matrix Keypad Panel | Slim Elongated Flexible Arms with Gold Finger Terminations | Black Solder Mask | Integrated Rigid-Flex Construction | Connector-Free Design, Compatible with Full-Panel SMT Assembly
Panel Outer Dimension: 115×67mm
Applications
Industrial Instruments & Meters, Medical Devices, Security Mainframes, Portable Test Equipment, HMI Keypad Matrix Modules for Industrial Control
Product Introduction
This custom matrix keypad rigid-flex PCB is manufactured by Juehui Weiye Circuit. The full panel outer frame measures 115×67mm, housing 22 independent keypad units. The keypad load zone is 0.6mm FR4 rigid substrate, while the flexible signal transition arms adopt 0.1mm ultra-thin PI polyimide film. It is a double-sided circuit design. The rigid section features black solder mask with white legend; ENIG surface finish is applied on pads and gold finger areas.
Adopting a special-shaped slim flexible arm structure, the rigid keypad area routes out to gold finger interfaces via PI flexible arms. Traditional cables and connectors are eliminated to save assembly space. With FR4 process border and fiducial holes, the panel supports simultaneous full-panel SMT mounting for high mass-production efficiency. After depaneling, individual keypad modules are obtained, widely used for multi-channel matrix keypad control panels.
Product Overview
This keypad-specified rigid-flex PCB adopts double-sided Rigid-Flex construction. FR4 epoxy glass laminate is used for rigid sections, and high-temperature-resistant PI polyimide film for flexible sections. Low-flow Bondply adhesive film plus adhesive barrier isolation structure is applied for selective lamination. This design provides dedicated protection for slim flexible arms, preventing adhesive resin overflow into bending zones and avoiding cracking of delicate flexible arms during repeated bending.
Black solder mask is applied on rigid zones for light blocking and wear resistance, meeting cosmetic requirements for instrument front panels. PI coverlay protects fine traces on flexible sections, with precise openings only at keypad pads and gold finger contact areas. ENIG surface finish ensures flat, uniform plating on pads and gold fingers, delivering excellent oxidation resistance, wear resistance, stable contact resistance and compatibility with multiple reflow cycles.
The panel design includes fiducial holes, process borders and breakaway tabs for automated SMT assembly. We can evaluate bending radius and flexible arm routing based on customer mechanical drawings, optimize stack-up and panel layout to satisfy tight-space assembly requirements inside compact instruments.
Core Specifications
- Board Type: Double-sided Rigid-Flex PCB (Matrix Keypad Panel)
- Panel Outer Size: 115×67mm, 22pcs independent keypad units per panel
- Board Thickness: 0.6mm for rigid keypad area; 0.1mm for flexible arm area
- Base Material: Rigid: FR-4 Epoxy Glass; Flexible: PI Polyimide; Bonding Layer: Low-flow Bondply
- Flame Retardancy Rating: Rigid FR4: UL94 V-0; Flexible PI: UL94 VTM-0
- Surface Finish: ENIG (Electroless Nickel Immersion Gold) for keypad pads & gold fingers
- Copper Weight: Standard 1/2oz (18μm); Optional 1/3oz / 1oz
- Minimum Mechanical Hole Size: 0.15mm
- Minimum Line Width / Line Spacing: 0.075mm / 0.075mm
- Rigid Solder Mask: Black Solder Mask, White Legend
- Flexible Cover Protection: PI Coverlay, Openings at Gold Fingers & Keypad Pads
- Optional Processes: Impedance Control, Alternative Surface Finishes (Immersion Tin / Hard Gold Plating / OSP), Halogen-Free Materials, Custom Panelization
- Compliance Standards: IPC-6013 (Rigid-Flex Specification), IPC-6012
Product Advantages
1. Multi-Unit Panel Design: 22 keypad units within 115*67mm panel with process borders and fiducial holes, supporting full-panel SMT mounting and greatly boosting mass production efficiency.
2. Special Slim Elongated Flexible Arm Structure: Integrated PI flexible arms with terminal gold fingers replace wiring harnesses and connectors, reducing assembly parts and lowering failure risk from poor contact.
3. Black Solder Mask on Rigid Core: Light-blocking and friction-resistant, ideal for cosmetic requirements of instrument keypad panels.
4. Adhesive Barrier Selective Lamination: Isolation barriers for slim flexible arms strictly control resin overflow, solving the common industry issue of flexible arm cracking during bending.
5. ENIG Gold Fingers & Keypad Pads: Uniform gold plating with superior wear resistance, stable contact performance under frequent plugging and pressing, anti-oxidation.
6. Precisely Opened PI Coverlay: Protects ultra-fine traces on flexible sections with accurate opening alignment and no residual glue for stable yield.
7. Breakaway Tab Design: Easy depaneling without damaging flexible arm traces.
8. Full-Range Quality Control: AOI optical inspection + 100% Flying Probe Electrical Test, plus sampling bending reliability test for flexible arms to eliminate open/short defects on fine traces.
9. Complete Qualifications: Suitable for industrial control, medical and export orders with supporting documentation available.
Manufacturing Process Flow (For This Matrix Keypad Rigid-Flex PCB)
Material Cutting → PI Flexible Circuit Etching → Flexible AOI Inspection → FR4 Rigid Material Cutting & Circuit Fabrication → Rigid AOI Inspection → Stack-up + Adhesive Barrier Protection for Flexible Arms → Selective Lamination → Mechanical Drilling (Fiducial Holes, Screw Holes) → PTH Copper Plating → Outer Layer Etching → Outer Layer AOI → Black Solder Mask & Legend Printing on Rigid Section; PI Coverlay Lamination for Flexible Section, Openings for Gold Fingers & Pads → ENIG Surface Finish → Routing Profile, Flexible Area Relief Slotting, Breakaway Tab Machining → Flying Probe Electrical Test → FQC Visual Inspection + Bending Sampling Test → Packaging & Shipment
> Process Highlight: Adhesive barrier lamination control for slim shaped flexible arms is the core technical challenge for stable production of this product. Juehui Weiye has mature barrier solutions to guarantee repeated bending performance without cracking.
Target Industries & End Products
Industries: Industrial Instruments & Meters, Medical Test Equipment, Security Control Mainframes, Portable Detectors, Automation Equipment, Test Jigs, HMI Panels
Applicable Products: Multi-channel Matrix Keypad Modules, Instrument Operation Keypad Boards, Medical Device Keypad Units, Security Host Keypad Array Boards, Portable Tester Keypad PCBs, Test Fixture Rigid-Flex Keypad Boards, Compact Multi-Key Control Panels
Certifications
All PCB products from Juehui Weiye Circuit (Rigid-Flex, FPC, HDI) strictly follow IPC international standards with full authoritative certifications, providing traceable industrial and medical-grade quality:
✅ ISO9001 Quality Management System
✅ ISO13485 Medical Device Quality Management System
✅ UL Safety Certification (Flame Retardancy & Insulation Compliant)
✅ RoHS Environmental Certification (Lead-Free, Halogen-Free Optional)
✅ REACH EU Chemical Regulation Compliance, Ready for Export
Juehui Weiye Circuit | Custom Rigid-Flex PCB Manufacturing Service
Juehui Weiye Circuit offers stable mass production of special-shaped flexible arm, multi-panel Rigid-Flex PCBs, accepting prototype and small-to-medium volume orders for this type of matrix keypad rigid-flex boards.
✅ Mature adhesive barrier lamination process for slim flexible arms to control resin overflow and ensure reliable bending performance
✅ Multiple solder mask colors available: Black / Green / Red, custom ENIG on gold fingers and keypad pads
✅ Customizable panel layout, MARK fiducials, process borders and breakaway tabs to match your SMT production line
✅ One-stop support: Gerber review, stack-up optimization, bending radius simulation, CAM engineering
✅ AOI + 100% Flying Probe Test, flexible arm bending reliability sampling, strict screening for fine trace defects
✅ Support for multi-layer rigid-flex, HDI rigid-flex, impedance control; surface finish options: ENIG / Immersion Tin / Hard Gold / OSP
✅ English datasheets and test reports supplied for overseas orders
We specialize in custom Rigid-Flex PCB and one-stop PCB production for matrix keypad instrument panels, supporting fast prototyping and controllable lead time for volume orders.
Please send your Gerber files for technical evaluation and quotation!
189-2464-6170
szjhpcb@VIP.126.com




Material: FR-4+PI